Bonding expertise in medical environment by SUPRATEC Syneo In Nogent almost 12 million probes are produced for the medical field. The previous system we used was a cyanocrylate adhesive with a primer. It is similar to “super glue” which can be found on the DIY market After each stop of the production line, the operator needed to intervene immediately with the adhesive by either unblocking or replacing the needle. This system is relatively dirty. A really close cooperation was done with the technical team from SUPRATEC Syneo We worked on a new UV adhesive solution with hightly accurate automatic dispensing systems. A new adhesive for which there is practically no cleaning, the adhesive does not set and remains stable. As long as the adhesive does not go under the UV light it stays liquid and malleable, which was not the case before. Over the week-end, production stops. On Monday morning, the operators do not even worry about the bonding and restart the machine instantly. It is therefore very flexible to use. The implementation of this project took one year and a half. This system has been profitable in less than two years. So as we are very satisfied and we are going to renew.